Please note that updating or downgrading the app will delete you config if config templates change
Please compare ux0:/data/WolfgirlBreeder/png/version.cfg and PNGLive.vpk/template/version.cfg and ensure they are the same
If they do not match or this is your first install any current settings will be reset and the defaults will be created
Before installing a different version or reinstalling the current version copy app0:/image/Model somewhere else then copy it back after installing
If you do not do this then your PNGtuber or Vtuber 2D assets will be reset and replaced with Salts PNGtuber wearing a tuxedo

All model files go inside the app package itself so if you unisntall it will remove those
All config files go inside the data folder so they will not be removed if uninstalled, you have to delete those manually

--- CONTROLS --
Triangle: toggle accessory 0
Square: toggle accessory 1
Cross: toggle accessory 2
Circle: toggle accessory 3
Up: expression 0
Left: expression 1
Down: expression 2
Right: expression 3
Select: switch hand 0
Start: switch hand 1
L: toggle setting 0
R: toggle setting 1
T1: cosmetic 0
T2: cosmetic 1
T3: cosmetic 2
Tcos: change cosmetic pack
Tacc: change accessory pack
Than: change hand pack
Tset: change setting pack
Texp: change expression pack

After changing a prop pack props will not change until you change a prop governed by that pack
If you go past the pack number you want to use then keep going, the pack number will reset to 1 after reaching the highest pack you have enabled

--- ISSUES ---
Buttons render with weird clipping - This is an issue with me putting the pixel numbers wrong, may or may not be fixed
Buttons do not rotate in Vita3k - This is because there is only a check for if this is running on hardware or in software, will not be fixed
Vita3k crashes if packs are switched 99% of the time - This is an issue with Vita3k, Vita3k is very early in development and does not emulate things perfectly, if you feel you can fix this issue consider contributing to Vita3k on github
Settings and cosmetics graphics are swapped - This is because they were accidentally switched in developemnt and was not noticed until everything was already working, will not be fixed
Setting this up is very time consuming and somewhat confusing - This is simply because this is an example at this moment, setup will be done by just feeding your unprocessed PNGtuber to the program in the future
Updating deletes my PNGtuber - This is because the model is currently stored in the app package itself, this will be changed in the future
Updating resets my config files - This is because i have not thought of a way to cleaning update and config changes, this will be fixed in the future
The app crashes if a pack is empty but set to active - This is because you did not read the instructions, this can be fixed by reading the instructions, in the future a check for this may or may not be added

--- STEP 1 ---
Make sure the following files exist:

app0:/image/model/accessories/pk1/active.txt
app0:/image/model/accessories/pk1/0.png
app0:/image/model/accessories/pk1/1.png
app0:/image/model/accessories/pk1/2.png
app0:/image/model/accessories/pk1/3.png
app0:/image/model/accessories/pk1/pack.png
app0:/image/model/cosmetics/pk1/active.txt
app0:/image/model/cosmetics/pk1/0.png
app0:/image/model/cosmetics/pk1/1.png
app0:/image/model/cosmetics/pk1/2.png
app0:/image/model/cosmetics/pk1/pack.png
app0:/image/model/expressions/pk1/active.txt
app0:/image/model/expressions/pk1/0.png
app0:/image/model/expressions/pk1/1.png
app0:/image/model/expressions/pk1/2.png
app0:/image/model/expressions/pk1/3.png
app0:/image/model/expressions/pk1/pack.png
app0:/image/model/hands/pk1/active.txt
app0:/image/model/hands/pk1/0.png
app0:/image/model/hands/pk1/1.png
app0:/image/model/hands/pk1/pack.png
app0:/image/model/settings/pk1/active.txt
app0:/image/model/settings/pk1/0.png
app0:/image/model/settings/pk1/1.png
app0:/image/model/settings/pk1/pack.png
app0:/image/UI/settings2.png
app0:/image/UI/keys2.png

Open each active.txt in packs you plan to use and change to "0" to a "1" if not already changed
This will tell the program that prop pack is active
If a situation occurs where a pack is set to active but the number before is not then the pack before WILL CRASH THE APP
Please rename the pack folders if you want to move them or have an unused pack before

If you do not have enough props to fill each required image in the packs you are using you can simply add a 1x1 pixel image of any colour and opacity
If that causes and weird renders you can just duplicate a prop from the same pack to fill the spot

When adding your props make sure they are scaled to 960x544 and are rotated -90 degrees so they stick to the right side of the screen
It is reccomended to use a program such as gimp, ibis paint, or medibang paint to scale all your props in the same image then lining them up using layers and individually exporting the layers
If your prop does not touch the edge of the 960x544 canvas you can optionally crop those down until the prop is in the bottom right corner
Cropping smaller or floating props and using a 1x1 pixel for unused props will speed up load times and stability (less disk and memory use)

Each category is limited to 5 packs of props, this is because i did not feel like expanding the UI to fit that
This may change in the future if requested
Each pack is limited to 2-4 props due to the psvita control scheme

If you are on a PSVITA or PSTV you can add previews to your packs by editing app0:/image/model/[set]/pkX/pack.png, a blank template can be found in app0:/template/pack.png
If you are in Vita3k you can add previews to your packs by editing app:/image/UI/keys2.png and app0:/image/UI/settings2.png, blank templates can be found at app0:/template/keys2.png and app0:/template/settings2.png

Accessories: 4 per pack, action buttons
Cosmetics: 3 per pack, touchscreen
Expressions: 4 per pack, dpad
Hands: 2 per pack, selection buttons
Settings: 2 per pack, bumpers

A template for the pack previews can be found at app0:/template/pack.png

--- STEP 2 (for VITA) ---
Install and set up UDCD_UVC plugin
Plug your system into your pc
Open your prefered streaming or recording software
Add a video capture device (webcam)
Select your system as the webcam

Rotate the video capture device window 90 degrees and crop 110 pixels off the left/top
Apply a chromakey
If a green chromakey causes issues with your character then change the chromakey colour to your desired rgb value then open ux0:/data/WolfgirlBreeder/png/greenscreen.cfg and enter that rgb value, please ensure each value is 3 digits and that they are partitioned by ,

Start streaming or recording

--- STEP 2 (for PSTV) ---
Get any hdmi capture card (cheap amazon usb capture sticks work fine)
Open your prefered streaming or recording software
Add a video capture device (webcam)
Select your capture card as the webcam

Rotate the video capture device window 90 degrees and crop the left/top until the ui is nolonger visible
Apply a chromakey
If a green chromakey causes issues with your character then change the chromakey colour to your desired rgb value then open ux0:/data/WolfgirlBreeder/png/greenscreen.cfg and enter that rgb value, please ensure each value is 3 digits and that they are partitioned by ,

Start streaming or recording

--- STEP 2 (for Vita3K desktop) ---
Suffer and pray all your props and the ui render (some images vanishing after 30 frames is a known issue with an unknown cause)
Open your prefered streaming or recording software
Add a window capture

Rotate the window capture 90 degrees and crop the left/top until the ui is nolonger visible
If a green chromakey causes issues with your character then change the chromakey colour to your desired rgb value then open ux0:/data/WolfgirlBreeder/png/greenscreen.cfg and enter that rgb value, please ensure each value is 3 digits and that they are partitioned by ,

Start streaming or recording

--- STEP 2 (for Vita3K mobile) ---
Suffer and pray all your props and the ui render (some images vanishing after 30 frames is a known issue with an unknown cause)
Turn off onscreen controls
Optional: Connect a bluetooth controller (PNGLive contains onscreen buttons)
Stream your screen to your desktop
Open your prefered streaming or recording software
Add a your screen stream

Rotate the stream 90 degrees and crop the left/top until the ui is nolonger visible
If a green chromakey causes issues with your character then change the chromakey colour to your desired rgb value then open ux0:/data/WolfgirlBreeder/png/greenscreen.cfg and enter that rgb value, please ensure each value is 3 digits and that they are partitioned by ,

Start streaming or recording

--- OPTIONAL STEP 3 ---
You can enable or disable the main ui by opening ux0:/data/WolfgirlBreeder/png/onscreen.cfg and changing the first number to 0
Yo can also disable the pack previews by changing th third number to 0, and the onscreen buttons by changing the second number to 0

--- DONATIONS ---
Think this software is helpful and want to support it? Consider donating!
Gcash, KakaoPay, Venmo are not supported for donation

Bitcoin: 1LNAXNUVCpAaNj3bisPnn99zP2mwTfvP3t
Ethereum: 0x336E9EE236275d5Ba5e3C41B2cDc29956Ca5F7a3
Ko-fi: wolfgirlbreeder